EN 
CNProducts
High temperature ceramic tube max 1800 degree
Materials：Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc
Sizes：Custom according to the drawings
Delivery times：2 -25 days(depends on the quantity)
Precision：Ra 0.1um tolerance: 0.001mm... etc
Features：Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation...
Customized：Can be custom for special sizes and shapes
Ceramic plates sheet substrate disc series
High heat and temperature resistant of ceramic tube
Thehigh temperature ceramic tubehave a excellent high heat temperature resistant ability. Ceramic tube can be used under1800 ℃ high temperatureenvironment.Coefficient of thermal expansion up to 13* 10∧6 from 20°C- 1000°C. up to 2800°C Melting point.
High temperature ceramic pipe tubes made by advance technical ceramics,like:95%--99.99% Alumina(Al2O3), Zirconia(ZrO2) ,Silicon Carbide,Silicon Nitride ...etcwhich have a excellent Physical properties,Mechanical properties,Electrical properties,Thermal properties. Wear hardness strength resistance.
we can produce ceramic tubes of different sizes, not limited to the following table.The sizes of some high temperature ceramic tubes are as follows :
| Outer Diameter (Inch) | Outer Diameter (mm) | Length (mm)(in) | |
| 0.212 | 5.38 | 84 | 3.31 |
| 0.25 | 6.35 | 340 | 13.39 |
| 0.264 | 6.71 | 210 | 8.27 |
| 0.327 | 8.3 | 110 | 4.33 |
| 0.339 | 8.6 | 95 | 3.74 |
| 0.354 | 9 | 84 | 3.31 |
| 0.433 | 11 | 340 | 13.39 |
| 0.551 | 14 | 210 | 8.27 |
| 0.64 | 16.26 | 180 | 7.09 |
| 0.75 | 19.05 | 360 | 14.17 |
| 0.775 | 19.69 | 440 | 17.32 |
| 1.1 | 27.94 | 520 | 20.472 |
| 1.35 | 34.29 | 340 | 13.386 |
| 0.157 | 4 | 340 | 13.386 |
| 0.472 | 12 | 150 | 5.906 |
| 0.492 | 12.5 | 180 | 7.087 |
| 0.433 | 11 | 210 | 8.268 |
| 0.520 | 13.2 | 240 | 9.449 |
| 0.551 | 14 | 270 | 10.630 |
| 0.575 | 14.6 | 300 | 11.811 |
| 0.638 | 16.2 | 330 | 12.992 |
| 0.594 | 15.1 | 360 | 14.173 |
| 0.827 | 21 | 390 | 15.354 |
| 1.102 | 28 | 420 | 16.535 |
| 1.181 | 30 | 450 | 17.717 |
| 1.378 | 35 | 480 | 18.898 |
Materials options:· 95%--99.99% Alumina (Al2O3)
· Silicon Carbide · Silicon Nitride
· TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2)
· ZDY: Yttria fully stabilized Zirconia (ZrO2)
Heat resistance of different ceramic materials:Al2O3 Alumina ceramics up to 1800℃（3272℉）high temperature resistance
ZrO2 Zirconia ceramics up to 1500℃（2732℉）high temperature resistance
SiC Silicon carbide ceramics up to 1500℃（2732℉）high temperature resistance
Si3N4 Silicon Nitride ceramics up to 1600℃（2912℉）high temperature resistance
As for the price, please provide the detailed requirements of the high temperature ceramic tube to us, such as: size, region, quantity, whether to customize and so on.If you provide detailed information, we will check all the costs and the delivery time is faster.
Quick Free Quote . Our official E mail: [email protected] (Mr admin)
1. Refractory, High Temperature Resistance, Maximum Used Temperature: 1800 ºC (3272ºF)...
2. Hardness Strength, Wear Resistance Up To Mohz 9.0 Levels...
3. High Voltage, Good Insulation Performance ,Electrical Resistivity Up To 10∧14 Ohm.Cm...
4. High Polished Surface Up To Rz0.8(Ra0.1) ...
5. Anti-High Corrosion Resistance, Such As Acid Alkali Resistance...
6. Long Service Life...Other excellent property
Furnace construction (heat conductor supports, pipes, burner nozzles)
Hot air generators (multi-hole pipes, honeycombs)
Heating element production (helical coil cartridges, cast-iron radiators)
Foundry technology such as cast steel (immersion-type sensors, moulded parts for foundries, casting filters)
Welding technology (Welding ceramics in the form of welding tubes, welding bars, welding chips)
1. Factory price with a discounts
2. Fast shipment within 24 hours
3. In stocks for hot sales sizes
4. MOQ:1qty
5. Online service
1. Can be custom for special sizes by drawing
2. Can offer a samples within 2 days
3. The delivery time within 20 days after confirmed the order
4. Factory price and Senior ceramic engineer service
5. Online service
As a ceramic plates manufacturer,us offer a wide of the ceramic specification,and customized&machinables. Get a Quote On Your Customized Now!! or up a files by EMAIL.
Our Custom Capabilities:1.High Purity Martoxid Powder
2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience
3.35000 ㎡workshop, annual output could reach hundred million pieces.
4.All crafts are inspected strictly based on drawings,checked each month.
5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Lead time:within 20 working days after comfirmed order. the samples within 3 days
| Technical reference of manufacture | |
| Dimensional accuracy | Up to 0.001mm |
| Concentricity | Up to 0.003mm |
| Parallelism | Up to 0.002mm |
| The inner hole tolerance | The minimum 0.005mm |
| Straight flute | The narrowest 0.1x100mm |
| The thickness of the size | Minimum to 0.02mm |
| The screw thread | Minimum internal thread M2 |
| Cylindricity | Up to 0.004mm |
| The linear tolerance | Up to 0.001mm |
| The smallest aperture | The minimum 0.07mm |
| Precision process | CNC maching,grinding,lapping |
| Surface finish | Glazed,polishing or metallized |
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.
For more information about ceramics parts,please contact our engineers in time>>>
