EN 
CNProducts
Zirconia Ceramic Tubes
Zirconia Ceramic Tubes
Materials：Zirconia(ZrO)>2)
Sizes：Mini ID:0.3mm;Mini length:0.5mm;Max length: 400mm
Delivery times：2 -25 days(depends on the quantity)
Precision：Ra 0.1um tolerance: 0.001mm... etcFeatures：Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation
Customized：zirconia ceramic tubes Can be custom for special sizes and shapes
1. Factory price and shipment within 24 hours In stocks
2. pMOQ:1qty
3. Payment Term: PayPal; T/T; L/C etc.
4. Shipment: by sea by air by courier by post etc.
Ceramic plates sheet substrate disc series
Zirconia Tube Outstanding Perfomance Zirconia Ceramic Tubes
Zirconia tubes (ZrO2) are made of high purity zirconia ceramic materials.our zirconia tubes raw includeing : Mg-PSZ zirconia tube (Magnesia - Partially stabilised zirconia ), Y-TZP zirconia tube (Yttria - Tetragonal zirconia polycrystal), Y-FSZ zirconia tube (Yttria - Fully stabilised zirconia)..etc Zirconia is a range ceramics that are inert to most chemicals, have exceptional strength, have high toughness and reliability which together result in outstanding resistance to wear and corrosion.
Types of zirconia ceramic tubes
| zirconia ceramic tube insulator | zirconia ceramic tube socket | zirconia ceramic tube core | zirconia ceramic tube cylinder |
| zirconia ceramic tube heater | zirconia ceramic tubing fitting | zirconia ceramic tube ferrule | others |
zirconia ceramic tube heater zirconia ceramic tubing fitting zirconia ceramic tube ferrule others
The grades of Zirconia include:
Mg-PSZ (Magnesia - Partially stabilised zirconia) – Highest toughness grades
Zirconia MS – “Maximum Strength” grade ideal for wear and corrosion solutions and used extensively in materials handling industries.
Zirconia TS – “Thermal Shock” grade provides high resistance to thermal shock and is used in non-ferrous metal extrusion applications.
Y-TZP (Yttria - Tetragonal zirconia polycrystal) - Highest strength and hardness grades with a finer grain structure:
Zirconia 3Y-TZP – A fine grain grade frequently used in the Petrochemical Industry and for applications required to maintain a sharp edge.
Y-FSZ (Yttria - Fully stabilised zirconia) - No transformation toughening.
Zirconia 8Y – An Yttria-Fully stabilised zirconia used in applications requiring high temperature oxygen diffusivity/electrical conductivity.
·Inside Diameter as small as 0.3 mm
·Longth as long as 400mm, as short as 0.5mm
·Inside Diameter tolerance we could make as fine as 0.002mm
·Outside Diameter tolerance as fine as 0.001mm
·We can be custom / OEM For the liner tube / pipes
Tip:For different industries, equipment,and environment, zirconia tube have different function,We can manufacturing ceramic tube by drawing, such as surface polishing, internal and external pipe wall threads, metal parts bonded, different shapes etc by custom requirement.
1. Factory price with a discounts
2. Fast shipment within 24 hours
3. In stocks for hot sales sizes
4. MOQ:1qty
5. Online service
1. Can be custom for special sizes by drawing
2. Can offer a samples within 2 days
3. The delivery time within 20 days after confirmed the order
4. Factory price and Senior ceramic engineer service
5. Online service
User industries
automotive, aviation, space travel
electrical and thermal insulation
electronics and sensors
energy technology, power generation
environmental technology
fluid technology
friction-reduction, wear- and corrosion -protection
high temperature applications
laboratory technology
laser technology
mechanical and chemical process engineering
metal industry
optics
semiconductor processing equipment
surface treatment
vacuum technology
Other ceramic materials for ceramic tubes(include but not limited belows)
· 95%--99.99% Alumina (Al2O3)
· Silicon Carbide
· Silicon Nitride
· TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2)
· ZDY: Yttria fully stabilized Zirconia (ZrO2)...
| Al2O3 | ZrO2/Y2O3 | ZrO2/MgO | MgO | SiC | Si3N4 Reaction sintered | Si3N4 Hot pressed | ALN | |
| Physical properties | ||||||||
| Density (g/cm³) | 3,9 | 5,9 | 5,75 | 3,58 | 3,2 | 3,27 | 3,29 | 3,26 |
| Molecular weight (g/mole) | 102 | - | - | 40,4 | 40,1 | 140 | 140 | 41 |
| Maximum service temperature air (°C) | 1700- 1800 | 1500 | 1000 | 2200 | 1500 | 1200- 1500 | 1100- 1600 | 1000- 1800 |
| Mechanical properties | ||||||||
| Hardness (Mohs) | 9 | - | - | 5,5 | 9 | - | - | 7 |
| Modulus of elasticity (GPa) | 300-400 | 200 | 200 | 250-300 | 420 | 170-220 | 280-310 | 318 |
| Poisson's ratio | 0,25 | - | - | 0,18 | 0,14 | 0,25-0,26 | 0,27 | 0,25 |
| Fracture toughness (MPa.m1/2) | 2-3 | 7-13 | 6-10 | - | 2,5-3,5 | 3,5-5 | 6,1 | 4,5 |
| Electrical properties | ||||||||
| Dielectric constant | 9-10 | - | - | 9-10 | - | 10 | 10 | 9,2 |
| Electrical resistivity at 20°C (Ohm.cm) | >10 14 | 10 13-10 14 | >10 10 | - | 10 2-10 6 | >10 7 | 10 12- 10 15 | >10 14 |
| Dielectric strength (kV/mm) | 10-20 | 9 | 2-10 | - | - | - | - | 15 |
| Thermal properties | ||||||||
| Specific heat (J/K/kg) | 900 | 400-500 | 420 | 870-880 | 750 | 690 | 680-800 | 800 |
| Thermal conductivity (W/m/K) at 20°C | 26-35 | 2,2-3,2 | 1,5-2,5 | 40-50 | 63-155 | 9-30 | 15-43 | 180 |
| Coefficient of thermal expansion ( 10-6) from 20 to 1000°C | 8-9 | 10-11 | 5-16 | 10-13 | 4-5 | 3 | 3,3 | 4,4-5,3 |
| Melting point (°C) | 2050 | 2590 | - | 2800 | 2500 | 1900 | 1900 | 2200 |
As a ceramic plates manufacturer,us offer a wide of the ceramic specification,and customized&machinables. Get a Quote On Your Customized Now!! or up a files by EMAIL.
Our Custom Capabilities:1.High Purity Martoxid Powder
2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience
3.35000 ㎡workshop, annual output could reach hundred million pieces.
4.All crafts are inspected strictly based on drawings,checked each month.
5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Lead time:within 20 working days after comfirmed order. the samples within 3 days
| Technical reference of manufacture | |
| Dimensional accuracy | Up to 0.001mm |
| Concentricity | Up to 0.003mm |
| Parallelism | Up to 0.002mm |
| The inner hole tolerance | The minimum 0.005mm |
| Straight flute | The narrowest 0.1x100mm |
| The thickness of the size | Minimum to 0.02mm |
| The screw thread | Minimum internal thread M2 |
| Cylindricity | Up to 0.004mm |
| The linear tolerance | Up to 0.001mm |
| The smallest aperture | The minimum 0.07mm |
| Precision process | CNC maching,grinding,lapping |
| Surface finish | Glazed,polishing or metallized |
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.
For more information about ceramics parts,please contact our engineers in time>>>
