EN 
CN
Products
Alumina Ceramic Rod 95% - 99% Alumina Al2O3 Industry Rods Bars
Materials：Alumina (Al2O3) 95% - 99.99%
Sizes：Mini-OD:0.02mm; Max-length:500mm
Delivery times：2 -25 days(depends on the quantity)
Precision：Ra 0.1um tolerance: 0.001mm... etc
Features：Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation...
Customized：Can be custom for special sizes and shapes
Ceramic plates sheet substrate disc series
Alumina Ceramic Rod 95% - 99.99% Alumina Al2O3 Industry Rods Bars
Features of Alumina Ceramic Rod :
1. Refractory, High Temperature Resistance, Maximum Used Temperature: 1800 ºC (3272ºF)...
2. Hardness Strength, Wear Resistance Up To Mohz 9.0; HRA 80-90...
3. High Voltage, Good Insulation Performance ,Electrical Resistivity Up To 10∧14 Ohm.Cm...
4. High Polished Surface Up To Rz0.8(Ra0.1) ...
5. Superior Mechanical Strength, Max 10 MPa.m1/2 Fracture toughness,
6. Pressure Resistance, Max 2300MPa compressive strength...
7. Anti-High Corrosion Resistance, Such As Acid Alkali Resistance...
8. Long Service Life...
9. Other excellent property
We can produce ceramic rods of different sizes, not limited to the following table.
The sizes of some ceramic rods are as follows :
| Outer Diameter(Inch) | Outer Diameter(mm) | Length(mm)(in) | |
| 0.011 | 0.28 | 10 | 0.39 |
| 0.02 | 0.51 | 19 | 0.75 |
| 0.022 | 0.56 | 150 | 5.91 |
| 0.024 | 0.61 | 210 | 8.27 |
| 0.096 | 2.44 | 230 | 9.06 |
| 0.011 | 0.28 | 80 | 3.15 |
| 0.02 | 0.51 | 20 | 0.79 |
| 0.022 | 0.56 | 34 | 1.34 |
| 0.024 | 0.61 | 53 | 2.09 |
| 0.096 | 2.44 | 75 | 2.95 |
| 0.125 | 3.18 | 90 | 3.54 |
| 0.137 | 3.48 | 130 | 5.12 |
| 0.083 | 2.1 | 110 | 4.33 |
| 0.047 | 1.2 | 95 | 3.74 |
| 0.126 | 3.2 | 84 | 3.31 |
| 0.157 | 4 | 340 | 13.39 |
| 0.236 | 6 | 210 | 8.27 |
| 0.188 | 4.78 | 110 | 4.33 |
| 0.197 | 5 | 95 | 3.74 |
| 0.212 | 5.38 | 84 | 3.31 |
| 0.25 | 6.35 | 340 | 13.39 |
| 0.264 | 6.71 | 210 | 8.27 |
| 0.327 | 8.3 | 110 | 4.33 |
| 0.339 | 8.6 | 95 | 3.74 |
| 0.354 | 9 | 84 | 3.31 |
| 0.433 | 11 | 340 | 13.39 |
| 0.551 | 14 | 210 | 8.27 |
| 0.64 | 16.26 | 180 | 7.09 |
| 0.75 | 19.05 | 360 | 14.17 |
| 0.775 | 19.69 | 440 | 17.32 |
| 1.1 | 27.94 | 520 | 20.47 |
| 1.35 | 34.29 | 340 | 13.39 |
The shapes of the ceramic rods we produce are as follows:
round, hexagon, square, semicircle, polygon, hole, etc. Can be customized
Dimension and Tolerance:
● Diameter as small as 0.2mm， depends on length
● Diameter tolerance we could make as fine as 0.001mm
As for the price, please provide the detailed requirements of the ceramic rod to us, such as: size, region, quantity, whether to customize and so on.If you provide detailed information, we will check all the costs and the delivery time is faster.
Custom service:
We are a professional manufacturer of ceramic rods, selling hot sizes of ceramic rods in stock, also support to customize different specifications of ceramic rods, according to the parameters or drawings provided by the customer.
Alumina ceramics(95%, 96%, 97%,98%,99.5%,99.7%,99.8% Al2O3 Alumina)
Alumina ceramic rod is made of high purity alumina material, which is formed by cold isostatic pressure, sintered at high temperature and processed precisely.
Alumina ceramic rod has the advantages of high temperature resistance, wear resistance, corrosion resistance, high hardness, low friction coefficient and so on. It is widely used in medicine, precision machinery, precision measurement and detection and laser industry, and can be used in the environment of acid and alkali corrosion and high temperature for a long time.
Our company produces Al2O3 alumina ceramic rod, the purity can choose 95% ~99.99% alumina, 99.9% alumina according to the needs of customers. can be customized according to customer requirements.
Type of ceramic rods us manufacturer (including but not only belows)
| Shaft plunger | Center rod | Other materials:· 95%--99.99% Alumina (Al2O3) ● Silicon Carbide ● Silicon Nitride· TTZ: Magnesia partially stabilized Zirconia (ZrO2) ● YTZP: Yttria partially stabilized Zirconia (ZrO2) ● ZDY: Yttria fully stabilized Zirconia (ZrO2) |
| Wear rod bar stick | Pump plunger rod | |
| Pins rod | Positioning bar | |
| Piston rod | Plunger rod | |
| Rail bar | Sleeve and bushing plunger | |
| Machinable rods | Other type rods | |
| Tip:For different industries, equipment,and environment, ceramic rods have different function,We can manufacturing ceramic rod by drawing, such as surface polishing, internal and external pipe wall threads, metal parts bonded, different shapes etc by custom requirement. | ||
| The general specifications service 1. Factory price with a discounts 2. Fast shipment within 24 hours 3. In stocks for hot sales sizes 4. MOQ:1qty 5. Online service | The Custom service 1. Can be custom for special sizes by drawing 2. Can offer a samples within 2 days 3. The delivery time within 20 days after confirmed the order 4. Factory price and Senior ceramic engineer service 5. Online service |
The properties of ceramic
| Flexural strength | Chemical resistance | Electrical insulation | Corrosion resistance | Dielectric strength |
| Wear resistance | Temperature resistance | Thermal conductivity | High voltage | Hardness... |
Ceramic materials(include but not limited belows)
● 95%--99.99% Alumina (Al2O3)
● Silicon Carbide
● Silicon Nitride
● TTZ: Magnesia partially stabilized Zirconia (ZrO2)
● YTZP: Yttria partially stabilized Zirconia (ZrO2)
● ZDY: Yttria fully stabilized Zirconia (ZrO2)...
Customization & Machining Service:
As a ceramic parts manufacturer,us offer a wide of the ceramic specification,and customized&machinables. Get a Quote On Your Customized Now!! or up a files by EMAIL.
Our Custom Capabilities:
1.High Purity Martoxid Powder
2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience
3.35000 m² workshop, annual output could reach hundred million pieces.
4.All crafts are inspected strictly based on drawings,checked each month.
5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Technical reference of manufacture | |
Dimensional accuracy | Up to 0.001mm |
Concentricity | Up to 0.003mm |
Parallelism | Up to 0.002mm |
The inner hole tolerance | The minimum 0.005mm |
Straight flute | The narrowest 0.1x100mm |
The thickness of the size | Minimum to 0.02mm |
The screw thread | Minimum internal thread M2 |
Cylindricity | Up to 0.004mm |
The linear tolerance | Up to 0.001mm |
The smallest aperture | The minimum 0.07mm |
Precision process | CNC maching,grinding,lapping |
Surface finish | Glazed,polishing or metallized |
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.
