Products
Ceramic Plunger Piston Kit For Pump Valves
Materials:Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc
Sizes:Mini ID:0.3mm;Mini length:0.5mm;Max length: 400mm
Delivery times:2 -25 days(depends on the quantity)
Precision:Ra 0.1um tolerance: 0.001mm... etc
Features:Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation...
Customized:Can be custom for special sizes and shapes
Ceramic plates sheet substrate disc series
Product description
General Pump Replacement Ceramic Piston Plunger
Note: 3 plungers are required to service entire pump
Plunger shaft rod | Diameter (D:3-35mm) |
Length (L:20-650mm) | |
Can be machining thread,polishing,connecting metal part | |
Sleeve pump body | Inside Diameter as small as 0.3 mm |
Longth as long as 400mm, as short as 0.5mm | |
Inside Diameter tolerance we could make as fine as 0.002mm | |
Outside Diameter tolerance as fine as 0.001mm | |
Wall thickness:0.5-15mm | |
Pump head | Can be customized |
Sealing rings | Can be customized |
Metal parts | Can be customized |
Fits General Pump Models
T1508 TT2028 TT9091 TT551 TT561 TT741 TT751 TT901 TT931 TT941 TT951 TT1508 TT1510 TT1511 TT1512 TT1513 TT9071 TT9061 TT2035E TT2035G
Fits Interpump Pump Models
W1507 WW1508 WW1509 WW1510 WW1511 WW1513 WW95 WW55 WW56 WW74 WW75 WW90 WW93
Fits Turbo and Boxjet Models
15 19 21 8-70 8-90 10-100 11-50 11-70 11-120 13-90
Fits Big Bang and Formula 99 Models
F-122 F-124 X-117S X-161 X-220S X-230 X-240S
Shipping & Handling
Shipping Service: Please refer to shipping section
Shipping Cost: Please refer to shipping section
Order Processing Time: 1 business day
Customer Support
If you have questions about the product or your order please contact us or email:[email protected]. Thank you.
Delivery:
In stock shipping wihin 24 hours
Custom OEM will be shipped within 15 days after determining the parameters
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations (the price,delivery time,moq etc
Machining process
Raw materials-Molding process - Sintering - Machining & Grinding - Quality Inspector
Mingrui ceramic parts property
· Flexural strength · Chemical resistance · Electrical insulation · Corrosion resistance · Dielectric strength
· Wear resistance · Temperature resistance · Thermal conductivity · High voltage · Hardness...
Ceramic materials(include but not limited belows)
· 95%--99.99% Alumina (Al2O3)
· Silicon Carbide
· Silicon Nitride
· TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2)
· ZDY: Yttria fully stabilized Zirconia (ZrO2)...
Al2O3 | ZrO2/Y2O3 | ZrO2/MgO | MgO | SiC | Si3N4 Reaction sintered | Si3N4 Hot pressed | ALN | |
Physical properties | ||||||||
Density (g/cm³) | 3,9 | 5,9 | 5,75 | 3,58 | 3,2 | 3,27 | 3,29 | 3,26 |
Molecular weight (g/mole) | 102 | - | - | 40,4 | 40,1 | 140 | 140 | 41 |
Maximum service temperature air (°C) | 1700- 1800 | 1500 | 1000 | 2200 | 1500 | 1200- 1500 | 1100- 1600 | 1000- 1800 |
Mechanical properties | ||||||||
Hardness (Mohs) | 9 | - | - | 5,5 | 9 | - | - | 7 |
Modulus of elasticity (GPa) | 300-400 | 200 | 200 | 250-300 | 420 | 170-220 | 280-310 | 318 |
Poisson's ratio | 0,25 | - | - | 0,18 | 0,14 | 0,25-0,26 | 0,27 | 0,25 |
Fracture toughness (MPa.m1/2) | 2-3 | 7-13 | 6-10 | - | 2,5-3,5 | 3,5-5 | 6,1 | 4,5 |
Electrical properties | ||||||||
Dielectric constant | 9-10 | - | - | 9-10 | - | 10 | 10 | 9,2 |
Electrical resistivity at 20°C (Ohm.cm) | >1014 | 1013-1014 | >1010 | - | 102-106 | >107 | 1012- 1015 | >1014 |
Dielectric strength (kV/mm) | 10-20 | 9 | 2-10 | - | - | - | - | 15 |
Thermal properties | ||||||||
Specific heat (J/K/kg) | 900 | 400-500 | 420 | 870-880 | 750 | 690 | 680-800 | 800 |
Thermal conductivity (W/m/K) at 20°C | 26-35 | 2,2-3,2 | 1,5-2,5 | 40-50 | 63-155 | 9-30 | 15-43 | 180 |
Coefficient of thermal expansion ( 10-6) from 20 to 1000°C | 8-9 | 10-11 | 5-16 | 10-13 | 4-5 | 3 | 3,3 | 4,4-5,3 |
Melting point (°C) | 2050 | 2590 | - | 2800 | 2500 | 1900 | 1900 | 2200 |
Customization & Machining Service:
As a ceramic parts manufacturer,us offer a wide of the ceramic specification,and customized&machinables. Get a Quote On Your Customized Now!! or up a files by EMAIL.
Our Custom Capabilities:
1.High Purity Martoxid Powder
2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience
3.35000 ㎡workshop, annual output could reach hundred million pieces.
4.All crafts are inspected strictly based on drawings,checked each month.
5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Technical reference of manufacture | |
Dimensional accuracy | Up to 0.001mm |
Concentricity | Up to 0.003mm |
Parallelism | Up to 0.002mm |
The inner hole tolerance | The minimum 0.005mm |
Straight flute | The narrowest 0.1x100mm |
The thickness of the size | Minimum to 0.02mm |
The screw thread | Minimum internal thread M2 |
Cylindricity | Up to 0.004mm |
The linear tolerance | Up to 0.001mm |
The smallest aperture | The minimum 0.07mm |
Precision process | CNC maching,grinding,lapping |
Surface finish | Glazed,polishing or metallized |
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.
For more information about ceramics parts,please contact our engineers in time >>>