Products
Ceramic metering pump high temperatrure corrosion resistance ceramic pump
Materials:Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc
Sizes:Custom according to the drawings
Delivery times:2 -25 days(depends on the quantity)
Precision:Ra 0.1um tolerance: 0.001mm... etc
Features:Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation
Customized:Can be custom for special sizes and shapes
Ceramic plates sheet substrate disc series
Ceramic metering pump high temperatrure corrosion resistance ceramic pump
High precision Alumina Zirconia Ceramic Pump OEM
Ceramic metering pump module incorporates a ceramic piston/valve/cylinder set with housing. pump parts contain piston/valve/cylinder.
Sets are typically comprised of 316 Stainless Steel and alumina and zirconia material. Custom materials can be used and are available upon request.
The piston/valve/cylinder set is sealed by the fit of the piston into the cylinder.
Technical indexes of ceramic metering pump
1. Loading range: 0.2-500ml;
2, using temperature: 10 ~ 40 ℃;
3. Filling accuracy standard: when the filling volume is less than 2ML, the upper and lower deviation shall not exceed 1%;When filling > 2ML, the upper and lower deviation shall not exceed 0.5%.
Applications
1.For a variety of micro,small,doses of liquid quantitative packaging
2.For a variety of corrosive liquid dispensing,for example the battery electrolyte capacitor electrolyte
3.For injection,oral hygiene lever required high quantitative packaging.
4.For quantitative liquid cosmetics for advanced packaging.
5.For Food high hygiene lever required quantitative packaging.
The component of ceramic pump:
Plunger shaft rod | Diameter (D:3-35mm) |
Length (L:20-650mm) | |
Can be machining thread,polishing,connecting metal part | |
Sleeve pump body | Inside Diameter as small as 0.3 mm |
Longth as long as 400mm, as short as 0.5mm | |
Inside Diameter tolerance we could make as fine as 0.002mm | |
Outside Diameter tolerance as fine as 0.001mm | |
Wall thickness:0.5-15mm | |
Pump head | Can be customized |
Sealing rings | Can be customized |
Metal parts | Can be customized |
Ceramic materials(include but not limited belows)
· 95%--99.99% Alumina (Al2O3)
· Silicon Carbide
· Silicon Nitride
· TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2)
· ZDY: Yttria fully stabilized Zirconia (ZrO2)...
Al2O3 | ZrO2/Y2O3 | ZrO2/MgO | MgO | SiC | Si3N4 Reaction sintered | Si3N4 Hot pressed | ALN | |
Physical properties | ||||||||
Density (g/cm³) | 3,9 | 5,9 | 5,75 | 3,58 | 3,2 | 3,27 | 3,29 | 3,26 |
Molecular weight (g/mole) | 102 | - | - | 40,4 | 40,1 | 140 | 140 | 41 |
Maximum service temperature air (°C) | 1700- 1800 | 1500 | 1000 | 2200 | 1500 | 1200- 1500 | 1100- 1600 | 1000- 1800 |
Mechanical properties | ||||||||
Hardness (Mohs) | 9 | - | - | 5,5 | 9 | - | - | 7 |
Modulus of elasticity (GPa) | 300-400 | 200 | 200 | 250-300 | 420 | 170-220 | 280-310 | 318 |
Poisson's ratio | 0,25 | - | - | 0,18 | 0,14 | 0,25-0,26 | 0,27 | 0,25 |
Fracture toughness (MPa.m1/2) | 2-3 | 7-13 | 6-10 | - | 2,5-3,5 | 3,5-5 | 6,1 | 4,5 |
Electrical properties | ||||||||
Dielectric constant | 9-10 | - | - | 9-10 | - | 10 | 10 | 9,2 |
Electrical resistivity at 20°C (Ohm.cm) | >1014 | 1013-1014 | >1010 | - | 102-106 | >107 | 1012- 1015 | >1014 |
Dielectric strength (kV/mm) | 10-20 | 9 | 2-10 | - | - | - | - | 15 |
Thermal properties | ||||||||
Specific heat (J/K/kg) | 900 | 400-500 | 420 | 870-880 | 750 | 690 | 680-800 | 800 |
Thermal conductivity (W/m/K) at 20°C | 26-35 | 2,2-3,2 | 1,5-2,5 | 40-50 | 63-155 | 9-30 | 15-43 | 180 |
Coefficient of thermal expansion ( 10-6) from 20 to 1000°C | 8-9 | 10-11 | 5-16 | 10-13 | 4-5 | 3 | 3,3 | 4,4-5,3 |
Melting point (°C) | 2050 | 2590 | - | 2800 | 2500 | 1900 | 1900 | 2200 |
Customization & Machining Service:
As a ceramic plunger manufacturer,us offer a wide of the ceramic plunger specification,and customized&machinables. Get a Quote On Your Customized Now!! or up a files by EMAIL.
Our Custom Capabilities:
1.High Purity Martoxid Powder
2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience
3.35000 ㎡workshop, annual output could reach hundred million pieces.
4.All crafts are inspected strictly based on drawings,checked each month.
5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Lead time:within 20 working days after comfirmed order. the samples within 3 days
Technical reference of manufacture | |
Dimensional accuracy | Up to 0.001mm |
Concentricity | Up to 0.003mm |
Parallelism | Up to 0.002mm |
The inner hole tolerance | The minimum 0.005mm |
Straight flute | The narrowest 0.1x100mm |
The thickness of the size | Minimum to 0.02mm |
The screw thread | Minimum internal thread M2 |
Cylindricity | Up to 0.004mm |
The linear tolerance | Up to 0.001mm |
The smallest aperture | The minimum 0.07mm |
Precision process | CNC maching,grinding,lapping |
Surface finish | Glazed,polishing or metallized |
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.
For more information about ceramics parts,please contact our engineers in time >>>