EN 
CNProducts
Ceramic Piston Plunger Sufficient Strength Stiffness Stability Alumina Zirconia Position Plungers
Materials：Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc
Sizes：Diameter:3-60mm;length:20-650mm
Delivery times：2 -25 days(depends on the quantity)
Precision：Ra 0.1um tolerance: 0.001mm... etc
Features：Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation...
Customized：Can be custom for special sizes and shapes
Ceramic plates sheet substrate disc series
Ceramic Piston Plunger Sufficient Strength Stiffness Stability Alumina Zirconia Positon Plungers
Custom ceramic spare parts
High precision Advance Technical Ceramic Parts OEM
We manufacture and customize different specifications of ceramic piston plunger, which have a high temperature resistance, strength and hardness, abrasion resistance, bending resistance and other excellent performance.ceramic piston plunger made from the current advanced technology of ceramic raw materials.
High-pressure ceramic plunger is mainly made of zirconia and alumina ceramic raw materials forming, sintering (the process of transforming powdery materials into dense bodies) and processing.
Type of ceramic plunger shaft piston rod us manufacturer(including but not only belows)
| Shaft plunger | Pump plunger |
| Wear Plunger rod | Filling Pump plunger |
| Pins rod | Water Pump plunger |
| Pump piston rod | Plunger rod |
| Pump shaft rod | Sleeve and bushing plunger |
| Machinable plunger | Piston plunger |
| Tip:For different industries, equipment,and environment, ceramic plunger have different function, We can machining ceramic plunger shaft piston rod , such as surface polishing, internal and external pipe wall threads, metal parts bonded, different shapes etc by custom requirement. | |
The feature of ceramic plunger:
1. Refractory , High Temperature Resistance, Maximum Used Temperature: 1800 ℃ （3272℉）...
2. Hardness Strength, Wear Resistance Up To Mohs' scale 8.0 HRA 80-90
3. High Voltage, Good Insulation Performance ,Electrical Resistivity Up To 10∧14 Ohm.Cm...
4. High Polished Surface Up To Rz0.8(Ra0.1) ...
5. Superior Mechanical Strength...
6. Pressure Resistance...
7. Anti-High Corrosion Resistance, Such As Acid Alkali Resistance...
8. Long Service Lift...
9. Other Excellent Property
Related accessories of plunger shaft
Piston, Piston Ring, Support Ring, Pump Cylinder, Piston Rod, Seal Parts,Washer, Nuts Etc.
Parts of us oem position plunger
| Lmin (mm) | S (mm) | d (φ) | D (φ) | Lmax (mm) | Mounting hole (mm) |
| 310 | 160 | 10 | 22 | 470 | 9 |
| 181 | 61 | 6 | 15 | 281 | 6.5 |
| 181 | 83 | 6 | 15 | 281 | 6.5 |
| 131 | 38 | 6 | 15 | 181 | 6.5 |
The length, diameter and shape of the plunger shaft are customized according to your drawing.Can be plunger rod processing, drilling, thread, add metal pieces.
For more informaitons （the price,delivery time,moq etc）about the ceramic plunger,please contact us or email:[email protected]
Applied to the pump
| Rotary lobe pump | Diaphragm pump | Vane pump | Progressing cavity pump |
| Rotary gear pump | Screw pump | Peristaltic hose | Plunger Pumps |
| Piston pump | Gear pump | Bladder Pumps | Double Diaphragm Pumps |
| Peristaltic Pumps | Rotary Lobe Pumps | Rotary Vane Vacuum Pumps | Others... |
Ceramic spare parts for pump series
| Cylinder | Valve Plate | Piston | Set Plate |
| Ball Guide | Pump Liner | Shaft | Shoe Plate |
| Pin | Rod | Ring And Sealing Parts | Washer |
| Disc | Block | Tube | Flange |
| Bushing | Sleeve | Impeller | Others... |
Ceramic materials
· 95%--99.99% Alumina (Al2O3) · Silicon Carbide · Silicon Nitride · TTZ: Magnesia partially stabilized Zirconia (ZrO2) · YTZP: Yttria partially stabilized Zirconia (ZrO2)
· ZDY: Yttria fully stabilized Zirconia (ZrO2)...
| Al2O3 | ZrO2/Y2O3 | ZrO2/MgO | MgO | SiC | Si3N4 Reaction sintered | Si3N4 Hot pressed | ALN | |
| Physical properties | ||||||||
| Density (g/cm³) | 3,9 | 5,9 | 5,75 | 3,58 | 3,2 | 3,27 | 3,29 | 3,26 |
| Molecular weight (g/mole) | 102 | - | - | 40,4 | 40,1 | 140 | 140 | 41 |
| Maximum service temperature air (°C) | 1700- 1800 | 1500 | 1000 | 2200 | 1500 | 1200- 1500 | 1100- 1600 | 1000- 1800 |
| Mechanical properties | ||||||||
| Hardness (Mohs) | 9 | - | - | 5,5 | 9 | - | - | 7 |
| Modulus of elasticity (GPa) | 300-400 | 200 | 200 | 250-300 | 420 | 170-220 | 280-310 | 318 |
| Poisson's ratio | 0,25 | - | - | 0,18 | 0,14 | 0,25-0,26 | 0,27 | 0,25 |
| Fracture toughness (MPa.m1/2) | 2-3 | 7-13 | 6-10 | - | 2,5-3,5 | 3,5-5 | 6,1 | 4,5 |
| Electrical properties | ||||||||
| Dielectric constant | 9-10 | - | - | 9-10 | - | 10 | 10 | 9,2 |
| Electrical resistivity at 20°C (Ohm.cm) | >1014 | 1013-1014 | >1010 | - | 102-106 | >107 | 1012- 1015 | >1014 |
| Dielectric strength (kV/mm) | 10-20 | 9 | 2-10 | - | - | - | - | 15 |
| Thermal properties | ||||||||
| Specific heat (J/K/kg) | 900 | 400-500 | 420 | 870-880 | 750 | 690 | 680-800 | 800 |
| Thermal conductivity (W/m/K) at 20°C | 26-35 | 2,2-3,2 | 1,5-2,5 | 40-50 | 63-155 | 9-30 | 15-43 | 180 |
| Coefficient of thermal expansion ( 10-6) from 20 to 1000°C | 8-9 | 10-11 | 5-16 | 10-13 | 4-5 | 3 | 3,3 | 4,4-5,3 |
| Melting point (°C) | 2050 | 2590 | - | 2800 | 2500 | 1900 | 1900 | 2200 |
As a ceramic plates manufacturer,us offer a wide of the ceramic specification,and customized&machinables. Get a Quote On Your Customized Now!! or up a files by EMAIL.
Our Custom Capabilities:1.High Purity Martoxid Powder
2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience
3.35000 ㎡workshop, annual output could reach hundred million pieces.
4.All crafts are inspected strictly based on drawings,checked each month.
5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Lead time:within 20 working days after comfirmed order. the samples within 3 days
| Technical reference of manufacture | |
| Dimensional accuracy | Up to 0.001mm |
| Concentricity | Up to 0.003mm |
| Parallelism | Up to 0.002mm |
| The inner hole tolerance | The minimum 0.005mm |
| Straight flute | The narrowest 0.1x100mm |
| The thickness of the size | Minimum to 0.02mm |
| The screw thread | Minimum internal thread M2 |
| Cylindricity | Up to 0.004mm |
| The linear tolerance | Up to 0.001mm |
| The smallest aperture | The minimum 0.07mm |
| Precision process | CNC maching,grinding,lapping |
| Surface finish | Glazed,polishing or metallized |
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.
For more information about ceramics parts,please contact our engineers in time>>>
