Products
Anti Heat Plunger Rods Wear And Corrosion Resistant Alumina Zironia High Temperature Ceramic Plunger
Materials:Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc
Sizes:Diameter:3-60mm;length:20-650mm
Delivery times:2 -25 days(depends on the quantity)
Precision:Ra 0.1um tolerance: 0.001mm... etc
Features:Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation...
Customized:Can be custom for special sizes and shapes
Ceramic plates sheet substrate disc series
Anti Heat Plunger Rods Wear And Corrosion Resistant Alumina Zironia High Temperature Ceramic Plunger
Custom ceramic spare parts
High precision Advance Technical Ceramic Parts OEM
The ceramic plunger is made of advance ceramic raw materials alumina, zirconia, silicon carbide, silicon nitride..., formed by isostatic pressure and sintered at high temperature.
Type of ceramic plunger shaft piston rod us manufacturer (including but not only belows)
Shaft plunger | Pump plunger |
Wear Plunger rod | Filling Pump plunger |
Pins rod | Water Pump plunger |
Pump piston rod | Plunger rod |
Pump shaft rod | Sleeve and bushing plunger |
Machinable plunger | Piston plunger |
Tip: For different industries, equipment,and environment, ceramic plunger have different function, We can machining ceramic plunger shaft piston rod , such as surface polishing, internal and external pipe wall threads, metal parts bonded, different shapes etc by custom requirement. |
the high temperature ceramic plunger has strong resistance to high temperature, good thermal conductivity and insulation.Can afford the highest temperature is as high as 2200 ℃.Therefore, it is widely applied in industry to extremely hot environments.
ceramic plunger has the advantages of super hardness, high wear-resisting,good corrosion resistance and electric insulation,resistant acid-base,high intensity,thermostable,high temperature tolerance,good insulation,high strength,precision process,high mechanical strength,good chemical stability.Good smoothness, mechanical seal good, polishing surface and so on.
Features:
1. Refractory , High Temperature Resistance, Maximum Used Temperature: 1800 ℃ (3272℉)...
2. Hardness Strength, Wear Resistance Up To Mohs' scale 8.0 HRA 80-90
3. High Voltage, Good Insulation Performance ,Electrical Resistivity Up To 10∧14 Ohm.Cm...
4. High Polished Surface Up To Rz0.8(Ra0.1) ...
5. Superior Mechanical Strength...
6. Pressure Resistance...
7. Anti-High Corrosion Resistance, Such As Acid Alkali Resistance...
8. Long Service Lift...
9. Other Excellent Property
Parts of us oem plunger(include but not limited belows)
Nominal Diameter | Length | Diameter(D)Tolerance (mm) |
0.6 | 3 | 0 ~-0.01 |
0.8 | 3 | 0 ~-0.01 |
1 | 3 | 0 ~-0.01 |
1 | 8 | 0 ~-0.01 |
1 | 20 | 0 ~-0.01 |
2 | 5 | 0 ~-0.01 |
2 | 6 | 0 ~-0.01 |
2 | 15 | 0 ~-0.01 |
3 | 6 | 0 ~-0.01 |
3 | 10 | 0 ~-0.01 |
4 | 8 | 0 ~-0.012 |
The length, diameter and shape of the plunger are customized according to your drawing.Can be plunger processing, drilling, thread, add metal pieces.
For more informaitons (the price,delivery time,moq etc)about the ceramic plunger,please contact us or email:[email protected]
Related accessories of plunger
Plunger rod, sealing parts, pump liner, pump body, washer, shaft...
Applied to the pump
Rotary lobe pump | Diaphragm pump | Vane pump | Progressing cavity pump |
Rotary gear pump | Screw pump | Peristaltic hose | Plunger Pumps |
Piston pump | Gear pump | Bladder Pumps | Double Diaphragm Pumps |
Peristaltic Pumps | Rotary Lobe Pumps | Rotary Vane Vacuum Pumps | Others... |
Ceramic materials
· 95%--99.99% Alumina (Al2O3)
· Silicon Carbide
· Silicon Nitride
· TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2)
· ZDY: Yttria fully stabilized Zirconia (ZrO2)...
Al2O3 | ZrO2/Y2O3 | ZrO2/MgO | MgO | SiC | Si3N4 Reaction sintered | Si3N4 Hot pressed | ALN | |
Physical properties | ||||||||
Density (g/cm³) | 3,9 | 5,9 | 5,75 | 3,58 | 3,2 | 3,27 | 3,29 | 3,26 |
Molecular weight (g/mole) | 102 | - | - | 40,4 | 40,1 | 140 | 140 | 41 |
Maximum service temperature air (°C) | 1700- 1800 | 1500 | 1000 | 2200 | 1500 | 1200- 1500 | 1100- 1600 | 1000- 1800 |
Mechanical properties | ||||||||
Hardness (Mohs) | 9 | - | - | 5,5 | 9 | - | - | 7 |
Modulus of elasticity (GPa) | 300-400 | 200 | 200 | 250-300 | 420 | 170-220 | 280-310 | 318 |
Poisson's ratio | 0,25 | - | - | 0,18 | 0,14 | 0,25-0,26 | 0,27 | 0,25 |
Fracture toughness (MPa.m1/2) | 2-3 | 7-13 | 6-10 | - | 2,5-3,5 | 3,5-5 | 6,1 | 4,5 |
Electrical properties | ||||||||
Dielectric constant | 9-10 | - | - | 9-10 | - | 10 | 10 | 9,2 |
Electrical resistivity at 20°C (Ohm.cm) | >1014 | 1013-1014 | >1010 | - | 102-106 | >107 | 1012- 1015 | >1014 |
Dielectric strength (kV/mm) | 10-20 | 9 | 2-10 | - | - | - | - | 15 |
Thermal properties | ||||||||
Specific heat (J/K/kg) | 900 | 400-500 | 420 | 870-880 | 750 | 690 | 680-800 | 800 |
Thermal conductivity (W/m/K) at 20°C | 26-35 | 2,2-3,2 | 1,5-2,5 | 40-50 | 63-155 | 9-30 | 15-43 | 180 |
Coefficient of thermal expansion ( 10-6) from 20 to 1000°C | 8-9 | 10-11 | 5-16 | 10-13 | 4-5 | 3 | 3,3 | 4,4-5,3 |
Melting point (°C) | 2050 | 2590 | - | 2800 | 2500 | 1900 | 1900 | 2200 |
As a ceramic plates manufacturer,us offer a wide of the ceramic specification,and customized&machinables. Get a Quote On Your Customized Now!! or up a files by EMAIL.
Our Custom Capabilities:1.High Purity Martoxid Powder
2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience
3.35000 ㎡workshop, annual output could reach hundred million pieces.
4.All crafts are inspected strictly based on drawings,checked each month.
5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Lead time:within 20 working days after comfirmed order. the samples within 3 days
Technical reference of manufacture | |
Dimensional accuracy | Up to 0.001mm |
Concentricity | Up to 0.003mm |
Parallelism | Up to 0.002mm |
The inner hole tolerance | The minimum 0.005mm |
Straight flute | The narrowest 0.1x100mm |
The thickness of the size | Minimum to 0.02mm |
The screw thread | Minimum internal thread M2 |
Cylindricity | Up to 0.004mm |
The linear tolerance | Up to 0.001mm |
The smallest aperture | The minimum 0.07mm |
Precision process | CNC maching,grinding,lapping |
Surface finish | Glazed,polishing or metallized |
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.
For more information about ceramics parts,please contact our engineers in time>>>