EN 
CNProducts
Ceramic Flange Bushing Wear resistance Alumina Zirconia Si3N4 SiC Ceramic Sleeve Bushing
Materials：Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc
Sizes：Custom according to the drawings
Delivery times：2 -25 days(depends on the quantity)
Precision：Ra 0.1um tolerance: 0.001mm... etc
Features：Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation...
Customized：Can be custom for special sizes and shapes
1. Factory price and shipment within 24 hours In stocks
2. MOQ:1qty
3. Payment Term: PayPal; T/T; L/C etc.
4. Shipment: by sea by air by courier by post etc.
Ceramic plates sheet substrate disc series
Ceramic Flange Bushing Wear resistance Alumina Zirconia Si3N4 SiC Ceramic Sleeve Bushing
Ceramic flange bushing, bushing with flanged outside, flanged bushing.
Ceramic flange bushing function:
Ceramic flange sleeve bushing: generally plays the role of positioning, not easy to fall off, sliding, bushing is mainly a protective role, the protection of the shaft and the matrix is not direct wear, general bushing material selection slightly soft material, and the shaft on the wear, wear, bushing can be replaced easily.If bushing is not used, parts are replaced after wear and tear.Now the replacement is the bushing;The price is generally cheaper, easy to process;For the normal application and maintenance of mechanical equipment plays a vital role!
As a professional manufacturer of industrial ceramic flange bushing components.We can custom the sepcial specifications of ceramic bushing/sleeves or other ceramic parts.High quality,Factory price, on-time delivery, High composition of ceramics.
Part of available Ceramic flange bushing specifications:
| d | D | IDF7 | ODm6 | F | L1 | L-0.10 | |||||||||||
| -0.1 | -0.3 | ||||||||||||||||
| 15 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | 80 | 100 | ||||||||
| 10 | 14 | 10 | 0.04 | 14 | 0.034 | 22 | 2 | 1015 | 1020 | ||||||||
| 0.025 | 0.023 | ||||||||||||||||
| 12 | 18 | 12 | 0.05 | 18 | 25 | 3 | 1215 | 1220 | |||||||||
| 13 | 19 | 13 | 0.032 | 19 | 0.041 | 26 | 1315 | 1320 | |||||||||
| 14 | 20 | 14 | 20 | 0.028 | 27 | 1415 | 1420 | ||||||||||
| 15 | 21 | 15 | 21 | 28 | 1515 | 1520 | 1525 | 1530 | |||||||||
| 16 | 22 | 16 | 22 | 29 | 1615 | 1620 | 1625 | 1630 | |||||||||
| 20 | 30 | 20 | 0.061 | 30 | 40 | 5 | 2015 | 2020 | 2025 | 2030 | 2040 | ||||||
| 25 | 35 | 25 | 0.04 | 35 | 0.05 | 45 | 2515 | 2520 | 2525 | 2530 | 2540 | ||||||
| 30 | 40 | 30 | 40 | 0.034 | 50 | 3020 | 3025 | 3030 | 3035 | 3040 | 3050 | ||||||
| 31.5 | 40 | 31.5 | 0.075 | 40 | 3120 | 3135 | |||||||||||
| 35 | 45 | 35 | 0.05 | 45 | 60 | 3520 | 3530 | 3540 | 3550 | ||||||||
| 40 | 50 | 40 | 50 | 65 | 4020 | 4030 | 4040 | 4050 | |||||||||
| 45 | 55 | 45 | 55 | 0.06 | 70 | 4530 | 4540 | 4550 | 4560 | ||||||||
| 50 | 60 | 50 | 60 | 0.041 | 75 | 5030 | 5040 | 5050 | 5060 | ||||||||
| 55 | 65 | 55 | 0.09 | 65 | 80 | 5540 | 5560 | ||||||||||
| 60 | 75 | 60 | 0.06 | 75 | 0.062 | 90 | 7.5 | 6040 | 6050 | 6080 | |||||||
| 63 | 75 | 63 | 75 | 0.043 | 85 | 6367 | |||||||||||
| 70 | 85 | 70 | 85 | 0.073 | 105 | 7050 | 7080 | ||||||||||
| 75 | 90 | 75 | 90 | 0.051 | 110 | 7560 | |||||||||||
| 80 | 100 | 80 | 100 | 120 | 10 | 8060 | 8080 | 80100 | |||||||||
| 90 | 110 | 90 | 0.107 | 110 | 0.076 | 130 | 9060 | 9080 | |||||||||
| 100 | 120 | 100 | 0.072 | 120 | 0.054 | 150 | 10080 | 100100 | |||||||||
| 120 | 140 | 120 | 140 | 0.088 | 170 | 12080 | 120100 | ||||||||||
| 0.063 | |||||||||||||||||
The Ceramic flange bushing made of the advance ceramic which likes: 95%-99.99% alumina ceramic(Al2O3); zirconia ceramics; silicon carbide ceramics; silicon nitride ceramics..etc ceramic raw materials.which have a excellently ceramic properties such as high pressure temperature wear resistance..
Delivery of Ceramic flange bushing:
Custom OEM will be shipped within 15 days after determining the parameters
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations （the price,delivery time,moq etc）about the ceramic plates, please contact us or email:[email protected]
Machining process
Raw materials-Molding process - Sintering - Machining & Grinding - Quality Inspector
Mingrui ceramic parts property
· Flexural strength · Chemical resistance · Electrical insulation · Corrosion resistance · Dielectric strength
· Wear resistance · Temperature resistance · Thermal conductivity · High voltage · Hardness...
Ceramic materials(include but not limited belows)
· 95%--99.99% Alumina (Al2O3)
· Silicon Carbide
· Silicon Nitride
· TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2)
· ZDY: Yttria fully stabilized Zirconia (ZrO2)...
| Al2O3 | ZrO2/Y2O3 | ZrO2/MgO | MgO | SiC | Si3N4 Reaction sintered | Si3N4 Hot pressed | ALN | |
| Physical properties | ||||||||
| Density (g/cm³) | 3,9 | 5,9 | 5,75 | 3,58 | 3,2 | 3,27 | 3,29 | 3,26 |
| Molecular weight (g/mole) | 102 | - | - | 40,4 | 40,1 | 140 | 140 | 41 |
| Maximum service temperature air (°C) | 1700- 1800 | 1500 | 1000 | 2200 | 1500 | 1200- 1500 | 1100- 1600 | 1000- 1800 |
| Mechanical properties | ||||||||
| Hardness (Mohs) | 9 | - | - | 5,5 | 9 | - | - | 7 |
| Modulus of elasticity (GPa) | 300-400 | 200 | 200 | 250-300 | 420 | 170-220 | 280-310 | 318 |
| Poisson's ratio | 0,25 | - | - | 0,18 | 0,14 | 0,25-0,26 | 0,27 | 0,25 |
| Fracture toughness (MPa.m1/2) | 2-3 | 7-13 | 6-10 | - | 2,5-3,5 | 3,5-5 | 6,1 | 4,5 |
| Electrical properties | ||||||||
| Dielectric constant | 9-10 | - | - | 9-10 | - | 10 | 10 | 9,2 |
| Electrical resistivity at 20°C (Ohm.cm) | >1014 | 1013-1014 | >1010 | - | 102-106 | >107 | 1012- 1015 | >1014 |
| Dielectric strength (kV/mm) | 10-20 | 9 | 2-10 | - | - | - | - | 15 |
| Thermal properties | ||||||||
| Specific heat (J/K/kg) | 900 | 400-500 | 420 | 870-880 | 750 | 690 | 680-800 | 800 |
| Thermal conductivity (W/m/K) at 20°C | 26-35 | 2,2-3,2 | 1,5-2,5 | 40-50 | 63-155 | 9-30 | 15-43 | 180 |
| Coefficient of thermal expansion ( 10-6) from 20 to 1000°C | 8-9 | 10-11 | 5-16 | 10-13 | 4-5 | 3 | 3,3 | 4,4-5,3 |
| Melting point (°C) | 2050 | 2590 | - | 2800 | 2500 | 1900 | 1900 | 2200 |
As a ceramic plates manufacturer,us offer a wide of the ceramic specification,and customized&machinables. Get a Quote On Your Customized Now!! or up a files by EMAIL.
Our Custom Capabilities:1.High Purity Martoxid Powder
2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience
3.35000 ㎡workshop, annual output could reach hundred million pieces.
4.All crafts are inspected strictly based on drawings,checked each month.
5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
| Technical reference of manufacture | |
| Dimensional accuracy | Up to 0.001mm |
| Concentricity | Up to 0.003mm |
| Parallelism | Up to 0.002mm |
| The inner hole tolerance | The minimum 0.005mm |
| Straight flute | The narrowest 0.1x100mm |
| The thickness of the size | Minimum to 0.02mm |
| The screw thread | Minimum internal thread M2 |
| Cylindricity | Up to 0.004mm |
| The linear tolerance | Up to 0.001mm |
| The smallest aperture | The minimum 0.07mm |
| Precision process | CNC maching,grinding,lapping |
| Surface finish | Glazed,polishing or metallized |
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.
For more information about ceramics parts,please contact our engineers in time>>>
Customization
For the other sizes and shapes, we can offer a customization. please send the details or files to our official e-mail: [email protected]
