Ceramic Tube / Ceramic Rod / Ceramic Plate / Ceramic Valve / Ceramic Plunger / Ceramic Pump Manufacturer

Focus on Alumina / Zirconia ceramic parts R&D and production

+86 -181 2297 4730

Email:admin@cerampart.com

Ceramic Knowledge
Location:Home > Ceramic Knowledge >
  1. The Injection Molding of Zirconia Ceramic Structural Parts

    The Injection Molding of Zirconia Ceramic Structural Parts

    Zirconia ceramic injection molding, also known as hot pressing injection molding, it has been widely used in the manufacture of special ceramic products with complex shape and high requirements for size and quality.... 2021-04-02
  2. Atmospheric Pressure Sintering of Ceramics

    Atmospheric Pressure Sintering of Ceramics

    Atmospheric Pressure Sintering of Ceramics Atmospheric pressure sintering, also known as pressureless sintering, refers to a process of sintering by heating products under atmospheric pressure. Atmospheric pressure sintering , also known as... 2021-03-29
  3. Needle bearing, ceramic bearing clearance

    Needle bearing, ceramic bearing clearance

    The radial internal clearance of needle roller bearing varies due to the matching of the bearing, the temperature difference between the track wheel and the rolling body, the load, etc., which will have a great impact on the life, precision,... 2021-03-26
  4. 8 applications of porous ceramic materials

    8 applications of porous ceramic materials

    Pore-ceramic is a new type of ceramic material, also known as pore-functional ceramics. It is a kind of ceramic material with a large number of interconnected or closed pores in the body after it is shaped and fired at high temperature.... 2021-03-17
  5. Introduction to elbow friction and impact

    Introduction to elbow friction and impact

    Introduction to elbow friction and impact Elbow friction and wear When materials are transported by air or pass through bend pipe under the action of gravity, a large number of materials and the inner wall of pipe will produce relative slid... 2021-03-17
  6. Comparison of traditional gear with ceramic gear

    Comparison of traditional gear with ceramic gear

    Abstract: zirconia ceramics and alumina ceramics are both wear-resistant and high-temperature ceramics, so there are many advantages in manufacturing ceramic gears with them compared with traditional gears.... 2021-03-17
  7. What are the advantages of wear-resistant ceramic valves?

    What are the advantages of wear-resistant ceramic valves?

    The properties of the ceramic valve are determined. The tensile strength, compressive strength, modulus of elasticity, hardness, etc. are all very high.... 2021-03-17
  8. What are the characteristics of ceramic rods?

    What are the characteristics of ceramic rods?

    What are the characteristics of ceramic rods? Ceramic bar has the following characteristics: (1) ceramic bar accepts high performance technical ceramic material with high hardness, abrasion resistance, high temperature resistance, corrosion... 2021-03-17
Home page 1 2 3 4 5 6 7 8 9 10 11 The previous page back All 29page229

Contact Us

  1. 120.214.*.* - China/Henan - Ceramic rod

    69.243.*.* - America/Chicago - Ceramic tube

    140.233.*.* - America/New_York - Zirconia ceramic

    195.75.*.* - Europe/Madrid - Ceramic pin

CONTACT US
在线客服系统